| Spec. | Size(thickness*Width) | Length/Roll |
| FSL 1205 | 1.2mm*50mm | 100 meter/roll |
| FSL 1210 | 1.2mm*100mm | 100 meter/roll |
| FSL 1405 | 1.4mm*50mm | 100 meter/roll |
| FSL 1410 | 1.4mm*100mm | 100 meter/roll |
| FSL 1415 | 1.4mm*150mm | 100 meter/roll |
| FSL 1420 | 1.4mm*200mm | 100 meter/roll |
We use Toray T700 fiber, with a tensile strength above 4900Mpa, Tensile modulus 240 Gpa, elongation 2.2%, 5000 meters continuous without any break
Email Us An advanced strain control system, minimum harm to carbon fiber, maintain the properties of carbon fiber. Automatic strength control system makes every fiber has spread and strain evenly, high efficient, big output 10
times of usual production lines.
Carbon fiber reinforcement is a new type of reinforcement method that plays a very important role in building reinforcement engineering. There are many places where it can be used. In the building reinforcement industry, carbon fiber reinforcement is…
This campaign project Gaoziku Reservoir Reinforcement Project (project name) has been organized and implemented by Suining Kaida Investment Co., Ltd. as the project owner according to the approval of the management committee. The project has been qua…
Concrete column is the main load-bearing component in the building. With the increase of the service time of the building, the durability of the concrete column is prone to decline and the strength and rigidity are insufficient due to the early defec…
Composite sheet pile is a kind of high-strength new material, which is made of the environmental polymer reinforced composite material by a variety of additives. The shape of sheet pile is designed according to the mechanical principle, adopting the …
Stairs are divided into two types: staircases and beams. Slab stairs are composed of platform beams, platform slabs, and ramp slabs. Beam staircases have increased ramp sloping beams compared to slab stairs. The stair steps and plates have similar st…
Carbon fiber is made of organic parent fiber such as polyacrylonitrile (PAN) (or asphalt, viscose) by pyrolysis method under high temperature above 1000 degrees Celsius inert gas (the result is to remove most elements except carbon) Is an inorganic p…